Is a waterproof coating that excels in its ability to repel liquids, providing an impenetrable barrier against the elements. By using the X30’s superhydrophobic properties, this spray ensures your gear remains safe and secure from the unpredictable forces of nature.

6

To prevent damage when flying in humid or wet conditions, it’s crucial to protect your electronic devices. Meet the Flywoo X30 Waterproof Superhydrophobic Spray, a game-changing product that redefines water resistance and makes your gear virtually impervious to the elements. This innovative solution provides a hassle-free, effective way to waterproof your drones and other electronic devices.

In this comprehensive overview, I’ll share my first-hand experience with the Flywoo X30, providing in-depth insights into its software capabilities, operational efficiency, and overall performance.

Explore this wealth of knowledge on silicone conformal coating for further insights. 

The Flywoo X30 is a cutting-edge, superhydrophobic coating that effectively waterproofs electronic devices by generating an imperceptible yet formidable barrier against water penetration. Unlike traditional conformal coatings that can be cumbersome and labor-intensive, the X30’s innovative design features a convenient spray bottle, streamlining the application process for a seamless experience. Once used, water effortlessly beads up and flows off the textured handle, keeping the surfaces remarkably dry.

The typical contents of each bottle include approximately 56.7 grams of the advanced water-repellent spray substance.

The compact Flywoo X30 spray opens to reveal a discreet, fragrance-free aerosol container. The application process is straightforward, involving merely the application of a few sprays to cover a compact flight control unit. The X30’s most notable feature is its ability to leave no lingering sticky or greasy residue behind. When substituting this substance, it precipitates out as a refined white solid upon drying.

Doesn’t conformal coating typically leave a residue with a glossy appearance, prone to attracting dirt and debris that can accumulate on the floorpan of your fuel cell?

Here are some pictures assessing the appearances of flight controllers paired with Flywoo X30 and conventional silicone conformal coatings. Earlier than Making use of:

Following a thorough examination, I found that the text requires a different style for clarity and precision. Here’s an improved version:

Using a Flywoo X30 on the left side and applying silicone conformal coating on the right side.

When exposed to moisture, FPV drone components often exhibit a phenomenon where water adheres to the printed circuit board (PCB) until it evaporates. This poses a significant risk of harm due to potentially life-threatening electrical fault circuits.

When applying the Flywoo X30 spray to the surface, the water exhibits an impressive beading effect, forming a distinct droplet that effortlessly rolls off the floor without any residual moisture remaining. And it’s fully dry!

Customers have thoroughly tested the X30’s durability by applying it to their mini off-road vehicles and then submerging them in water to evaluate its waterproofing capabilities. Although I don’t think this is the most effective approach, my waterproof device still functions surprisingly well when briefly submerged in water – I’ve tried it firsthand.

Here is the revised text in a different style:

Can the X30 create a physical barrier that impedes the flow of electrical energy, thereby preventing electrical shorts? During experimentation, I wrapped the terminals of certain wires with X30 spray, while others received silicone conformal coating, subsequently verifying circuit integrity via multimeter tests.

As expected, a single application of conventional silicone conformal coating effectively prevented brief circuits by forming a robust barrier.

Despite the application of three layers of X30 spray, occasional brief circuits still occurred, permitting motion to occur when the wires made contact in alignment. While the X30 has excellent waterproofing capabilities, it is still susceptible to brief electrical circuits. I’d argue that the product’s level of water resistance, rather than being waterproof, is more accurate.

While suitable for humid environments or light precipitation, this product is not designed to salvage a drone submerged in water, especially saltwater, following a crash. Despite appearances, there’s still a risk that a small electrical fault could occur and damage the drone’s components.

Utilizing the X30 spray is surprisingly straightforward.

1. Ensure that your electronics are thoroughly cleaned and dried before inspecting software. Use this product in a well-ventilated area or outside to ensure optimal performance and minimize any potential risks.
2. Shake the bottle thoroughly before spraying to ensure optimal results.
3. : Hold the bottle at an angle, positioning it approximately 5-6 inches (12-15 cm) above the surface, and apply a thin, uniform layer of coating with minimal pressure. Directly spray a diverse array of angles to guarantee thorough coverage of even the smallest crevices.
4. The coating should set quickly, depositing a thin, faintly white film. Allow the mixture to air dry completely for a period of 10 to 20 minutes. To further enhance security, consider implementing an additional two layers of protection.

Applying a minimum of three coats is often necessary to achieve the desired effect. According to Flywoo’s recommendations, approximately 2.5 grams of their spray are required to adequately coat each side of a flight controller three times. One small bottle of adhesive weighing approximately 56.7 grams is sufficient to coat around 20 flight controller boards.

• You may solder over the unsprayed spaces without using additional points. Unlike thicker conformal coatings that can hinder soldering efforts, the Flywoo X30’s design allows for easy and unobstructed connection soldering.
• If desired, reapplication of the spray proves to be a straightforward process. Clear the realm with a simple sweep of the brush and a light spritz of water, just one more time to ensure perfection.
• During experimentation, I found that applying multiple layers of coating to connectors and USB ports did not cause any irreversible damage; they functioned normally without exhibiting any signs of obstruction.
• While Flywoo asserts that the X30 spray won’t clog the barometer gap, I suggest applying a thin layer of tape for added assurance.

The Flywoo X30 superhydrophobic spray coating appears to be surprisingly detachable. When gently manipulated with a cotton swab, the coating readily separates without exerting much force, its slender layers drifting away like delicate flakes of snow. Both a blessing and a curse? While conventional conformal coating methods remain effective, there is no guarantee that they will provide an “extra everlasting” result.

The X30’s potential impact on FPV cameras extends beyond its circuit board to include the lens as well, making it a versatile tool. It minimizes water droplet formation on the lens, potentially disrupting vision. When flying in humid or foggy conditions, the experience can be frustratingly challenging. While a single coat may create a slight whitening effect on the lens, its subtlety makes it an acceptable compromise – certainly preferable to being unable to see at all.

With the spray applicator, you can effortlessly apply a coating to your electronics without needing to dismantle the entire drone. For anyone seeking to swiftly enhance water-resistance in their equipment, this feature presents a significant advantage.

Despite its benefits, this coating does not completely seal small gaps as effectively as traditional silicone-based conformal coatings do. To ensure comprehensive water-sealing and safety, especially in inaccessible regions, the application of silicone conformal coating is an absolute necessity.

I requested that Flywoo upgrade my order’s priority, as their standard procedure typically involves fully submerging the aircraft’s frame in X30 liquid. While this approach makes sense, it does come with a significant upfront cost and requires dismantling your quadcopter. Considering these drawbacks, wouldn’t using conformal coating be a more practical solution?

Flywoo has officially verified that their spray meets China’s stringent security standards, assuring that hazardous substances fall within permissible levels. Notwithstanding, the related documentation is available solely in Chinese; currently, there is no English translation guide.

While the spray lacks a discernible fragrance, unlike silicone conformal coatings, it is always prudent to exercise caution when handling these products. Work in a well-ventilated area, preferably equipped with personal protective equipment (PPE), including a mask and gloves, to ensure optimal safety.

The Flywoo X30 Superhydrophobic Spray offers a practical and user-friendly solution for adding a layer of water resistance to your electronic devices. While this coating doesn’t offer the same level of durability or comprehensive waterproofing as traditional methods, its strength lies in providing ease of application and temporary protection where those factors are paramount.

For additional insights into silicone conformal coatings, consult your existing resources.