Unleashing your DJI Avata 2 drone for the first time is a thrilling experience? Here is the rewritten text:
This tutorial will guide you through the essential steps to prepare your drone for its inaugural flight, providing valuable insights and expert tips to enhance both your flying skills and camera image quality.
Are you still undecided about whether the DJI Avata 2 FPV drone is right for you? Then, take a few minutes to read my comprehensive analysis.
When purchasing the DJI Avata 2, it’s highly recommended to opt for the Fly Extra Combo, which includes three high-capacity batteries.
Upon purchasing an Avata 2, you’ll receive a range of useful tools to enhance your experience.
Upon unboxing your DJI Avata 2, you can expect to find a comprehensive package containing all the essential components. Your box should include the drone itself, a controller designed specifically for seamless flight operation, multiple rechargeable batteries to keep your flying experience going, a charger to replenish power levels, a set of propellers for optimal performance and maneuverability, and detailed documentation that guides you through setup, safety precautions, and troubleshooting tips.
Charge the drone’s battery using the provided charger. Additionally, consider factoring in the cost of the controller and any necessary spare batteries.
Power on the Movement Controller and the Avatar 2 Drone. As soon as you’re ready to use the facility, press the button to check the battery voltage. To activate the goggles, press and hold the button until all the green LEDs light up.
The FPV goggles come with a tutorial that walks you through navigating the menu and using the movement controller to control your drone.
Before taking to the skies for the first time, ensure the goggles are activated, as they don’t need separate powering up like the drone itself. Connect the USB-C port of the goggles to a compatible device, then open the DJI Fly App and follow the on-screen instructions for setup and activation. You can download the app directly from DJI’s official website at.
Alternatively, download and install the latest version of DJI Assistant 2 (Consumer Drone Series) directly from this link to optimize your experience. When upgrading firmware for various DJI models, such as the O3 or standalone Avatar, ensure you update to the latest model available beforehand?
The app prompts you to update the firmware immediately.
Typically, the drone should be connected to the motion controller and goggles beforehand, streamlining the process and eliminating the need for manual pairing.
Activated and updated in a mere 10-15 minutes, you’ll be ready for liftoff.
For those new to the system, the Movement Controller may initially appear overwhelming due to its multitude of buttons. For even the most experienced aviators, the transition requires an adjustment period. To get started effectively, consider these essential principles:
- Double-pressing the lock button activates the drone’s arming sequence, initiating a gentle whir of its propellers as it prepares for takeoff.
- : A second press of the lock button disarms the system, and the motors come to a halt.
- With the drone fully prepped, hold down the Lock button to initiate a seamless takeoff sequence. The drone will rise to an altitude of approximately 1.2 metres and maintain a stationary position.
- Can you please confirm your destination and engage the braking system by pressing the lock button to momentarily halt the aircraft’s descent, allowing it to hover in a stable position? Reignite the passion for flight once again.
- To successfully land, hold down the lock button while keeping the plane steady in hover mode. The spacecraft will make a routine landing and then shut down its engines.
- Adjust the digital camera’s vantage point by subtly manipulating the movement controller’s orientation, either tilting it upward or downward for optimal framing and composition.
- Gently release the throttle and tilt the drone slightly to the left or right to adjust its direction.
- Control the drone’s direction using the joystick to steer it left or right seamlessly. By manipulating the throttle, you can modify the drone’s height, elevating or lowering it at a rate of approximately one meter per second.
- Press the accelerator all the way to move forward.
- To achieve upward or downward flight, ensure the throttle is fully disengaged and adjust the controller’s pitch accordingly.
By default, the DJI Avata 2 automatically enters Newbie mode, a setting specifically designed for novice pilots that provides a gentle and secure learning curve. When operating in this mode, you cannot switch between flight modes, a safety feature designed to prevent accidents while still learning the ins and outs of flying. Once you’ve mastered the basics, you’re ready to move forward.
: Go to Settings -> Management to show off Newbie mode. This unlocks the drone’s full potential, allowing you to seamlessly switch between distinct flight modes.
By pressing the flight mode button, you may accidentally activate Sport mode instead. With a sudden surge in speed and momentum! When you crave a little more excitement and the chance to truly unleash the capabilities of your drone.
In familiarizing yourself with Betaflight, you’ll likely appreciate the functionality of Turtle mode. This feature assists in rebooting the Avata 2 after a crash by automatically orienting its body upright. In the event that your drone ends up upside down following an unexpected mishap, this feature proves incredibly valuable, obviating the need for a costly retrieval mission to manually reboot the device. To access Turtle Mode, navigate to the Settings menu.
By firmly pressing twice on the specific spot on the goggles, you can instantly access a live video feed of your surroundings via the two forward-facing cameras.
The camera view defaults to a 2D perspective, utilizing just one of the multiple available cameras. You possibly can set it to 3D within the Settings-> Show which makes use of each cameras and truly improves usability IMO.
By seamlessly synchronizing digital camera movements with subtle head gestures, Head Monitoring technology elevates the flying experience, allowing pilots to effortlessly capture and command the surroundings with unparalleled precision. This is how things operate:
To enable head monitoring on your goggles, navigate to the top-level menu. This feature allows for smooth vertical movement of the digital camera gimbal in sync with your natural head movements when looking up or down. When you gaze leftward or rightward, the drone will pan accordingly, as its gimbal does not compensate for horizontal motion.
At first, navigating the digital camera with your head while operating the drone using the movement controller might feel somewhat awkward. Notwithstanding some experimentation, you may achieve dynamic and artistic images that would be difficult to replicate using standard controls.
Head Monitoring exclusively functions in conjunction with the Movement Controller, rendering compatibility issues with the Distant Controller 3.
Enabling the down-facing flight mode button allows for seamless activation of the Return to Home (RTH) feature at any point during flight. Upon returning home, you may regain control with a quick press of the Lock button. The kick is a perfect strike, landing just one meter from the goal line inside the house.
The DJI Avata 2 also features enhanced safety capabilities, including Low Battery RTH (Return to Home) and Failsafe RTH, ensuring your aircraft returns safely in the event of low battery or system failure.
Your avatar, distant, and goggles need to be properly linked outside of the field. Despite any potential reluctance, if you wish to reconnect these links for whatever reason, follow this straightforward process. On the latest devices, note that there is no dedicated link button; instead, to enter hyperlink mode, press and hold the power button for exactly 5 seconds.
- With the drone powered on, hold down the facilities button until you hear a steady beep, signifying that the battery level indicator LEDs begin to flash in sequence.
- As you power on the goggles, hold down the facility button until they emit a steady beep, signaling readiness for use.
- Linkage is complete when the beeping ceases, and the aircraft’s battery level indicators flash strongly.
- The distant stars twinkled like diamonds scattered across the velvet expanse, their celestial song a lullaby to the lonely wanderer’s soul.
The goggles, once dusty relics of a bygone era, now shone with a subtle sheen, as if infused with the whispers of the cosmos.
There’s no need to hyperlink the pilot onto the distant landscape as they gaze out through their goggles.
I tend to hesitate before updating firmware, as fresh releases often introduce limitations or changes that may impact my workflow. I always wait to see the group’s suggestions before updating?
Following a firmware replacement, ensure that you reboot your aircraft, remote controller, and goggles before taking off to guarantee a seamless experience. This ensures that all new settings take immediate effect accordingly.
Firmware updates may potentially reset critical flight settings, including Return-To-Home (RTH) altitude and maximum flight distance. Before updating, make sure to review and save your preferred settings to avoid any disruptions later.
In the event of a replacement failure, restart the entire system by relaunching the aircraft, remote controller, goggles, and both the DJI Fly app and DJI Assistant 2 (Client Drone Sequence) to ensure seamless operation. What is your current text that you’d like me to improve?
Unfortunately, the DJI Avata 2 does not provide a manual option for switching between FCC, CE, and SRRC frequencies. The aircraft will automatically detect its location and adjust to the corresponding region’s regulations based on cell network and GPS data, seamlessly switching between FCC, CE, and SRRC standards as needed.
While the ham file hack may not unlock additional channels as previously seen in Avata and Goggles 2, it does enhance RF output energy, enabling the drone to operate within a seemingly FCC-compliant RF energy mode. With this hack, the velocity limitations inherent in the EU’s regulations are lifted.
Download the “ham_cfg_support” file and extract it to the root directory of your SD card, then transfer it to the DJI Goggles 3. Obtainable here:
Third-party apps exist that claim to unlock FCC mode on the Avatar 2, but these solutions typically come with a price tag. While you can access a free app called Beyond (stylized as B3YOND), please note that it is currently unavailable for iOS users and only compatible with older versions of Android devices.
For customers using CE, channel mode will automatically default to auto and cannot be adjusted; thus, proceed directly to the subsequent section.
For FCC customers, I’m pleased to share with you these highly effective transmission settings that will undoubtedly enhance your experience.
Configure the Transmission Settings Handbook for comprehensive control over transmission parameters.
Select between the two frequency options: 2.4 gigahertz (GHz) or 5.8 GHz. With limited bandwidth and restricted to a single pilot due to narrow frequency channels, the 2.4 GHz range is better suited for applications requiring higher penetration through obstacles. This interferes with 2.4GHz radio links such as ExpressLRS; therefore, avoid using 2.4GHz when you or other pilots are operating on 2.4GHz frequencies. For those planning to fly with others, the 5.8GHz frequency band is generally preferred due to its significantly broader bandwidth. By exploiting interference, you may find that a particular frequency yields better signal quality compared to its counterpart, so try both options and assess the bitrate to make an informed decision.
Larger bandwidth enables higher picture quality, but increases the likelihood of interference from other pilots. When operating alone, pilots are generally authorized to utilize frequencies of 60MHz or 50MHz without compromising safety. To minimize disruptions when operating in teams, consider reducing transmission bandwidth to a frequency as low as 20MHz, with options for 50MHz or 40MHz, to effectively mitigate unwanted interference.
To utilize the 5.8GHz frequency band effectively, it is recommended to allocate three non-overlapping channels with respective bandwidths of 60MHz and 50MHz. To fully utilize a single available channel, leverage the “ham file” workaround by downloading and placing the file in the root directory of your goggles’ SD card.
To optimize the performance of the DJI Avata 2, it is essential to fine-tune the digital camera settings for exceptional video quality.
For the ultimate flying experience, without concern for documentation.
- Mode: Auto
- Decision: 1080p 100FPS
- Shade: Commonplace
For finest cinematic footage:
- The ND (Neutral Density) filter – a must-have for every photographer, and here’s why:
- Mode: Handbook
- Set your camera’s ISO to a minimum of 100 or opt for Auto mode, while limiting the maximum ISO to 400 or 800 for added adaptability.
- Decision: We opt for the superior 4K resolution at 60 frames per second to ensure seamless and safe flight operations, precluding any potential hazards posed by lower frame rates.
- Shutter Velocity: 1/120
- WB: Prioritize setting White Balance to Automatic at takeoff, allowing the system to automatically determine the optimal white point. Once stabilized, you can confidently set the lock-in value, ensuring consistent color accuracy throughout the entire flight.
- FOV: Broad
- Shade: D-log mode for color graders; Commonplace otherwise.
- EIS: OFF (recommended for users of GyroFlow), or employ RockSteady.
- What’s your request?
- Noise Reduction: -1 (adjusts to compensate for reduced light conditions in dark environments)
The Avata 2 offers a trio of stabilization modes – RockSteady, for maintaining smooth footage while moving rapidly; HorizonSteady, designed to keep your horizon level and stable; and Off, allowing for complete freedom from stabilization, ideal for capturing intentional camera movements. With RockSteady as the default setting, users can expect robust stabilization capabilities. You possibly can change this within the Settings > Digicam > EIS menu of the goggles. To achieve stabilized footage after flight, simply toggle off Electronic Image Stabilization (EIS) and switch your digital camera to its highest resolution setting to facilitate seamless integration with Gyroflow’s offline stabilization feature.
The native aspect ratio of 4:3 can become outdated with a switch to 16:9, resulting in both top and bottom cutoffs.
Testing of the Noise Discount feature reveals a significant impact on both the shadow and low-light aspects of an image.
While individual preferences for sharpness vary, a universal standard remains elusive?
Videos with bitrates below distinct thresholds experience varying degrees of quality degradation.
- 4K 60fps: 130Mbps
- 4K 50fps: 120Mbps
- 4K 30fps: 90Mbps
- 2.7K 60fps: 100Mbps
- 2.7K 50fps: 90Mbps
- 2.7K 30fps: 70Mbps
- 1080p 120fps: 80Mbps
- 1080p 100fps: 70Mbps
- 1080p 60fps: 50Mbps
- 1080p 50fps: 40Mbps
- 1080p 30fps: 25Mbps
The distant controller allows for seamless flight operation in full handbook mode, granting unparalleled control and precision. Before you start flying your RC3, ensure that you initially activate it by installing its firmware via the DJI Fly App or DJI Assistant 2 software.
To establish a connection between your Distant Controller 3 and DJI Goggles 3, please follow these steps:
- When you’ve activated the goggles, hold down the facility button until they start emitting a steady beep.
- When you’ve activated the remote control’s power feature, hold down the facility button until a beeping sound commences.
- When the beeping ceases, linking is considered complete, marked by the battery level LEDs displaying a solid indication of charging completion.
The Movement Controller remains functional with your drone; however, it’s limited to single-use operation, contingent on which device initially pairs with the Goggles 3?
Assign handbook mode to the mode button: Within the Goggles Settings->Controls->Distant Controller->Button Customization, set Customized Mode to Handbook Mode.
When flying in handbook mode, ensure the throttle stick is decentered to prevent self-centering. Removing the again cover of the rubber component will reveal two screws that require tightening to disable the throttle stick’s self-centering feature. While making slight adjustments by loosening or tightening each screw barely affects the friction, a degree of trial and error is required to achieve the desired setting.
You can seamlessly switch between Regular, Sport, and Handbook flight modes using the intuitive mode button.
To effortlessly transition your drone between Regular and Sport modes, follow these intuitive stick control patterns:
To enter or exit Handbook mode with your drone, simply double-press the Begin/Cease button. You can adjust the digital camera’s angle using the top-left rotary dial.
In the event of an emergency, ensure prompt action by utilizing the “Emergency Landing” or “Return to House” button available on all flight modes.
- As soon as the quad stabilizes and hovers in position, switch to Regular Mode.
- To initiate Return to Home (RTH), hold the button until activated; to abort RTH, press the button once more.
I’ve set my charger and expo for freestyle flying.
- 120/800/0.5
- 120/800/0.5
- 140/650/0.5
If video loss occurs, it’s likely that the issue stems from a faulty RC signal. Because of this requirement, it’s advisable to relinquish control; the Avata 2 should autonomously navigate back to its starting point frequently.
When flying above the altitude ceiling, the drone automatically reverts to Regular mode and prevents further ascent. You possibly can enhance the peak restrict as much as 500 meters (in Settings->Security), however you need to comply with your native laws. While there’s currently no viable solution to lift the altitude restriction, this remains another drawback of conventional FPV drones compared to those with advanced capabilities.
The DJI Avata 2 boasts a convenient ‘Find My Drone’ feature. To entry it, navigate via the goggles menu to Settings > Security > Discover My Drone. The characteristic displays video footage from 30 seconds prior to when the drone went missing, facilitating its recovery. The footage is internally recorded and stored in memory, eliminating the need for an SD card. Even if the drone still retains some battery power, you can engage the ESC Beeping function under the same menu to have the drone’s motors emit a beeping sound, making it easier to locate via audio cues.
To avoid accidental touch and ensure seamless functionality for Google Glass users: apply a small strip of adhesive-backed tape across the reflective surface beneath the lenses, carefully ensuring a secure bond to prevent movement during use. This feature ensures that the screens remain active even after removing the goggles, eliminating the brief delay when restarting the device.
As soon as you insert the batteries into the charging hub, it seamlessly commences charging. As particles are considered for reaction, they will be prioritized based on their initial energetic state, allowing the process to conclude more efficiently. When all batteries in your drone are depleted, consider combining their remaining energy levels into a single pack to extend your flight time. To do this, simply place all the batteries into the charger’s hub, then press and hold the power button until the LED indicator turns green. Press and hold the button to stop.
I’ve successfully used the Speedybee Discharger to balance-charge my large 6S 10,000mAh lithium-polymer battery pack. This charger is capable of recharging six Avata 2 battery units at once.
Transferring recordsdata to a telephone:
The Osmo Action 2 enables seamless file transfer through Wi-Fi connectivity via the DJI Fly app. With the drone’s power merely activated, initiate the QuickTransfer function through the app while ensuring a direct line-of-sight connection between the device and the drone within a 2-meter radius, free from any physical barriers or obstacles.
Transferring recordsdata to a pc:
Connect the drone to your PC using a USB cable without turning on the Avata 2; an external storage device should appear on your computer’s desktop. When using a memory card, simply insert it directly into your computer’s card reader for instant access.
Social media platforms will disseminate stay feeds through three primary channels.
- Stream live video feed from your DJI Goggles 3 device directly to a cell phone via secure and stable Wi-Fi connection for seamless collaboration or review. Establish a connection between the cellular machine and the Goggles 3 via Wi-Fi, then utilize the DJI Fly app to access the drone’s live video feed in real-time. This approach facilitates communication with a single cellular device. While latency exceeds 100ms, making it suboptimal for real-time applications like flying, the feed remains suitable for passive observation or spectating purposes. Why not consider a reliable USB wired connection instead?
- Connect your smartphone to the DJI Goggles 3 via an information cable and an OTG adapter for seamless integration. The related cellular machine will seamlessly stream the drone’s live feed to the DJI Fly app. Unlike Wi-Fi sharing, this methodology facilitates seamless connectivity for multiple devices. Latency is significantly lower than that of WiFi.
- Activate printing within the DJI Goggles 3 menu, enabling multiple goggles to receive the live feed without any viewer restrictions. This is perfectly tailored to share a pilot’s know-how with the audience.
Remember that you can only establish one type of connection at a time, whether connecting to goggles or a mobile device.
By meticulously adhering to the provided setup guidelines and expertly tailored recommendations, you will successfully capture breathtaking aerial cinematography alongside your DJI Avata 2 drone. Take pleasure in your flight!
Edit Historical past
- By April 2024, create a comprehensive overview of the Avata 2 by following these directions:
- As of August 2024, I established a dedicated submission process for recording setup details.
