To set up switches and management sticks within the mixes web page on EdgeTX, follow these steps:

When using EdgeTX, configuring stick and switch assignments on the webpage is crucial for flying your FPV drone effectively. Whether configuring sticks for basic flight control or organizing switches for arming, flight modes, and various features, this guidance will walk you through the process step by step.

By the end of this comprehensive guide, you will learn how to efficiently configure your management sticks to designated channels, streamline switch assignments for functions such as arming and flight mode adjustments, and thoroughly test your setup to ensure seamless performance.

What are your current experiences with EdgeTX?

To begin, launch the EdgeTX web page on your radio. On this platform, you’ll assign your management sticks and switches to various channels utilized by your flight controller.

1. .
2. Press the button from the display.
3. Select the “Navigation” tab by repeatedly pressing the button until you find it, or choose it from the menu if you’re using a touchscreen device.

A list of channels (e.g. Channel 1, Channel 2, Channel 3, etc.) awaits your discovery. Each channel can be assigned to a specific input option, such as a joystick or toggle, allowing for greater customization and control.

In various fashion styles, the four fundamental control channels (Channels 1-4) often correspond to key parameters: roll, pitch, throttle, and yaw. For instance:

• Channel 1: Roll (Aileron)
• Channel 2: Pitch (Elevator)
• Channel 3: Yaw (Rudder)
• Channel 4: Throttle

Typically, this process must be robotically configured when creating a brand-new model; however, when not, individuals can accomplish it themselves.

1. :
   • Navigate to the spotlight settings by rotating the jog wheel and then press Enter to access the configuration menu.
   • Position the control column’s aileron stick into its neutral setting.
   • You’ll have the flexibility to adjust the extent of stick input passed through to the output or apply settings for more refined control.
2. :
   • Spotlight .
   • Set the elevator switch?
3. :
   • Spotlight .
   • Position the throttle lever carefully to achieve optimal performance.
4. :
   • Spotlight .
   • Adjust the yoke to your desired heading.

Now that your switch configuration is complete, it’s time to allocate specific functionalities to each of your network devices. These switches offer versatile functionality, enabling users to perform various tasks such as arming the system, switching between different flight modes, and activating features like audible alerts or GPS-based emergency location services.

Setting Up an Arm Change

In ExpressLRS, . Here’s a way to set it up:

1. Highlighting
2. Navigate to the combo setup by pressing the jog wheel.
3. Toggle to the swap you wish to arm using (e.g.,). The selected toggle will automatically display as the active option, eliminating the need to manually scan through a list.
4. What’s left to go away with?

Setting Up a Mode Change

To configure different flight modes, such as Acro Mode, Angle Mode, and Horizon Mode, you may utilize a 3-position switch. What are your top five strengths as a leader?

1. Highlight
2. Utilize a triple-axis toggle () to effortlessly transition between distinct flight modes.

Many radios come equipped with additional features and controls that are rarely utilized in everyday use. While it’s possible to allocate all of them to external channels, this is generally not a necessity. For most FPV drone configurations, a pair of switches is all that’s typically required.

The range of available channels depends on your specific radio hyperlink setting. In ExpressLRS, users can configure up to 16 channels depending on the selected swap mode. In the standard configuration of numerous FPV drones, 12 channels are available, with the first four channels typically allocated to manage flight sticks and eight remaining channels reserved for auxiliary functions following their utilization.

For most high-performance FPV drones, I typically employ a panel with 3 to 4 intuitive switches.

• : To arm/disarm the drone.
• How to locate a misplaced drone?
• To seamlessly switch between Acro, Angle, and Horizon modes.
• In order to enable GPS rescue functionality in the event of signal loss.

Once you’ve successfully mapped your sticks and switches, it’s crucial that you thoroughly test and verify their functionality.

1. Open the tab in Betaflight, or your flight controller’s configuration device.
2. Before proceeding, ensure the drone is properly powered down by flipping its power switch to “off” and verifying all systems have shut down. Only then should you attempt to connect the battery, following standard safety procedures to avoid any potential risks or malfunctions.

Now you’ll be able to transition onto more advanced topics in your field.

Configuring management sticks and switches on the EdgeTX radio’s webpage is crucial for effortlessly controlling your FPV drone with precision and responsiveness. Regardless of whether you’re assigning management settings to fundamental features or configuring controls for arming and flight modes, meticulously following these steps guarantees precise mapping and ensures your drone is flight-ready.

Edit Historical past

• Sep 2018 – tutorial created
• As of September 2019, to date.
• As of October 2024, this information remains valid for both EdgeTX and ExpressLRS.