How to Flash, Replace, and Configure AM32 ESC: Backup and Restore Settings

Ensuring that your ESC firmware is up-to-date is crucial for achieving peak performance and resolving any lingering issues. This tutorial will guide you on how to flash and replace AM32 ESCs, enabling a seamless flying experience for you.

In order to upgrade an ESC currently running BLHeli_32 to AM32, a more complex flashing process is required, as installing the AM32 bootloader needs to be done first. Here are the detailed directions you requested. If your ESC’s firmware is already up-to-date with the AM32 version, follow these instructions to update or flash the device.

Additional Readings:

With experience using AM32 ESCs, I’ve found the flashing and updating process to be straightforward. The configurator boasts a user-friendly interface, offering the convenient ability to back up and effortlessly restore settings.

The AM32 Configurator is a web-based software that enables users to easily flash, replace, and configure their AM32 electronic speed controllers (ESCs). None are needed. Simply go to:

Selecting the “Configurator” tab from within the high-level middle navigation options.

When powering up your drone on a bench, remember to remove all propellers to prevent any accidental motor spin-ups, just in case.

To seamlessly integrate your AM32 ESC with the configurator.

1. Connect your flight controller to your laptop via a reliable USB cable, ensuring a secure and stable connection.
2. Insert the battery into the drone, ensuring that all propellers are removed.
3. : Open AM32 Configurator.
4. Click on the inexperienced button located at the top-right corner of the screen and select the flight controller’s COM port connected to your PC.
5. Hit the inexperienced join button, then navigate to ‘Learn’ and select the option to load your existing settings from the ESC. This course will display all linked Essential Safety Cells (ESCs).

The emergency shutdown (ESC) system powering should be ensured through the connection of a rechargeable battery.

To upgrade the firmware on your AM32 Electronic Speed Controller (ESC), follow this straightforward procedure:

1. Click the ‘Flash Firmware’ button to proceed. A dialog field will seem.
2. Relying on your ESC, the second discipline may automatically populate with the ESC model’s details. Choose the firmware model you desire to update, typically opting for the latest version available.
3. Verify the numbered containers containing the ESCs intended for replacement. To initiate a simultaneous flash of all four ESCs, simply activate each container individually.
4. Click on the “Begin Flash” button. The method initiates and briefly illuminates the selected Electronic Speed Controllers (ESCs). In approximately five minutes, you can complete the flashing process for a standard 4-in-1 ESC (Electronic Speed Controller).

To fine-tune your experience, simply modify these ESC settings as follows:

1. As you link, four containers immediately appear, each symbolizing one of the Essential Steps to Success (ESC).
2. All ESCs must be explicitly selected by clicking on the corresponding containers. When selected, the field border should toggle to green; otherwise, it remains gray.
3. If a motor is spinning in the incorrect direction, you can easily correct this by selecting the ‘Reversed’ option from the settings menu associated with the specific electronic speed controller (ESC) involved.
4. Verify 3D mode only when you want to enable autonomous flight in three dimensions, allowing the motors to adjust their trajectory mid-flight and maintain stable flight control.
5. I’ve developed a comprehensive guide that thoroughly explains each setting’s purpose. Hyperlink: coming quickly.
6. When you modify a setting without saving it, the field border is typically displayed in pink. As soon as the settings are saved, the field border will immediately turn green.
7. After applying your edits, don’t forget to click the blue ‘Save’ button to confirm your updates – not the ‘Save Config’ option.

Before upgrading to a new model or implementing significant changes, it’s prudent to back up your ESC settings.

1. Click ‘Save Config’, select the ESCs you wish to back up, and acquire the backup file in .bin format.
2. To restore a previously configured setup, navigate to ‘Apply Config’, select the relevant binary file from the available options, and then apply the chosen settings to your ESCs (Electronic Speed Controllers).

Upgrading and flashing your AM32 ESCs may seem intimidating at first, yet a straightforward process can be achieved with the right tools and clear instructions. The AM32 configurator provides an intuitive interface for effortlessly configuring and managing your Electronic Speed Controller (ESC) settings with ease. Regardless of whether you’re a novice or a seasoned pilot, utilizing current and finely tuned electronic speed controllers (ESCs) can significantly enhance your aerial proficiency. With ease, swap out your ESCs and unlock the reliable performance that comes with flying high-quality FPV drones.