Setup VTX Desk in Betaflight – Simplified VTX Management with SmartAudio or IRC Tramp Methods? To configure your VTX settings in Betaflight, navigate to the “Config” menu and select “VTX”. The following options will appear:

37.2K

In the realm of FPV (first-person view) drones, transmission quality is paramount, as it enables pilots to receive a live, high-definition video feed directly from their drone’s camera to their goggles. Betaflight boasts a VTX Management function that enables users to adjust VTX settings via the on-screen display (OSD) menu, offering a streamlined configuration experience. To utilize VTX Management effectively, configuring your VTX Desk according to your specific VTX setup is essential. What follows is an exploration of the VTX Desk concept, accompanied by straightforward procedures for configuring it within the Betaflight framework, together with illustrations of various VTX models.

Consider implementing a VTX Desk for your VTX system if you find it beneficial.

While you can still adjust the VTX channel, band, and energy level on your VTX without setting up the correct VTX Desk, you’ll miss out on the convenience of configuring these settings via the on-screen display (OSD) menu. Most Very Tiny Systems (VTXs), characterized by simplicity, typically feature limited indicators – just a few LEDs – alongside a solitary push-button interface, rendering the process of adjusting settings and identifying active channels somewhat convoluted. If you can adjust settings within the on-screen display (OSD), there’s no uncertainty and it’s straightforward.

A VTX Desk in Betaflight serves as a configuration interface that visualizes and manages frequency channels, energy bands, and various settings for your VTX, providing an intuitive platform to tailor the performance and behavior of your video transmitter. The Betaflight-compatible desk enables seamless communication between the flight controller and VTX, allowing for real-time adjustments to settings such as channel and power output via transmitter, OSD, or the Betaflight Configurator.

Four methods exist for setting your VTX desk within the Betaflight Configurator.

1. Configure settings in the Video Transmitter tab by entering specific values.
2. Load VTXTable in JSON information.
3. Run `docker exec -it vtex-table-container vtex table –help` to view available commands and options for the VTEX Table.
4. Load VTX Desk Presets.

It’s generally unadvisable to enter values manually in the Video Transmitter tab as this process is both time-consuming and prone to errors, making it a potentially frustrating experience.

To acquire the optimal VTX Desk, consider collaborating with a reputable VTX manufacturer or seeking guidance from online communities. When working with video transmission, they come in two forms: when you possess a JSON file, it’s crucial to load it into the Video Transmitter tab, accessible via a dedicated button located at the bottom of the screen. When working with command-line interfaces (CLI), ensure you carefully replicate command strings and insert them manually to execute desired actions.

While attempting to find a suitable VTX in the Presets tab of the Betaflight Configurator’s Betaflight configuration menu might be an option, it is important to note that the selection is limited to just a few options. If your VTX is installed, you can easily load the preconfigured VTX desk setting.

Verify that your VTX configuration is accurate in the Ports tab, specifically in the “Ports” tab, ensure that the UART associated with your VTX has “Peripherals” set to either “IRC Tramp” or “SmartAudio”, depending on the protocol employed by your VTX.

Your VTX desk is likely to be entirely distinct depending on the specific frequency bands and energy ranges it supports.

The VTX Desk CLI template’s functionality can vary significantly depending on the VTX Management protocol it supports. If you cannot locate the official VTX Desk but are familiar with the protocol, you may attempt adjusting the values in the template according to your VTX’s specifications, which should typically yield a functional outcome.

Notice that these templates initially permit access to all available channels, including some that may be illegal or restricted in certain jurisdictions. To effectively prevent unauthorized usage, consider configuring the frequency to zero, thereby disabling illicit broadcasts.

The IRC Tramp template remains unchanged, featuring a single, unified design for all conversations. While processing SmartAudio versions 1.0, 2.0, and 2.1 requires additional complexity due to the distinct templates used by each iteration. Here’s quick facts about .

All non-TBS VTXs utilizing SmartAudio technology come equipped with V2.0, alongside the legacy TBS Unify Professional model. The latest TBS Pro32 VTX and EVO models utilize the upgraded V2.1 technology. V1.0 virtually doesn’t exist anymore. Verify this information to your VTX’s specifications anyway.

vtxTable bands 5; 
vtxTable channels 8;
vtxTable band 1: BOSCAM_A (A CUSTOM) - 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725;
vtxTable band 2: BOSCAM_B (B CUSTOM) - 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866;
vtxTable band 3: BOSCAM_E (E CUSTOM) - 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945;
vtxTable band 4: FATSHARK (F CUSTOM) - 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880;
vtxTable band 5: RACEBAND (R CUSTOM) - 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917;
vtxTable powerLevels 5;
vtxTable powerValues 25, 100, 200, 400, 600;
vtxTable powerLabels 25, 100, 200, 400, 600; 
save

vtx_table bands=5; channels=8;
band 1: BOSCAM_A, factory settings: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
band 2: BOSCAM_B, factory settings: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
band 3: BOSCAM_E, factory settings: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
band 4: FATSHARK, factory settings: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
band 5: RACEBAND, factory settings: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
power levels: 4; power values: 7-16-25-40; power labels: 25-200-500-800
save

vtxTable bands 5
vtxTable channels 8
vtxTable band 1 BOSCAM_A A FACTORY (5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725)
vtxTable band 2 BOSCAM_B B FACTORY (5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866)
vtxTable band 3 BOSCAM_E E FACTORY (5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945)
vtxTable band 4 FATSHARK F FACTORY (5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880)
vtxTable band 5 RACEBAND R FACTORY (5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917)
vtxTable powerLevels 4
vtxTable powerValues 0, 1, 2, 3
vtxTable powerLabels 25, 200, 500, 800
save

vtxTable bands 5; vtxTable channels 8
vtxTable band 1 (BOSCAM_A, A FACTORY) - 
    5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
vtxTable band 2 (BOSCAM_B, B FACTORY) - 
    5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
vtxTable band 3 (BOSCAM_E, E FACTORY) - 
    5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
vtxTable band 4 (FATSHARK, F FACTORY) - 
    5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
vtxTable band 5 (RACEBAND, R FACTORY) - 
    5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
vtxTable powerlevels 4; vtxTable powervalues 14, 20, 26, 30
vtxTable powerlabels 25, 100, 400, 1W
save

The snippets are revised as follows:

https://github.com/ Discover in-depth knowledge about VTX Tables at this link:

To ensure seamless operation of Betaflight’s VTX management, you can tailor the VTX tables to suit your unique VTX setup.

Disabling the frequency at 0 prevents accidental transmission on unauthorized or unwanted channels, thereby ensuring compliance with legal requirements and maintaining control over your communication.

You may modify the facility ranges (extensibility of energy ranges), energy values, and energy labels (designations of energy ranges in milliwatts) as these are VTX-specific parameters.

VTX fashion examples include:

vtxTable Bands 5
vtxTable Channels 8
vtxTable Band 1: BOSCAM_A (Factory) - A frequencies 5865, 5845, 5825, 5805, 5785, 5765, 5745, and 5725 MHz
vtxTable Band 2: BOSCAM_B (Factory) - B frequencies 5733, 5752, 5771, 5790, 5809, 5828, 5847, and 5866 MHz
vtxTable Band 3: BOSCAM_E (Factory) - E frequencies 5705, 5685, 5665, 5645, 5885, 5905, 5925, and 5945 MHz
vtxTable Band 4: FATSHARK (Factory) - F frequencies 5740, 5760, 5780, 5800, 5820, 5840, 5860, and 5880 MHz
vtxTable Band 5: RACEBAND (Factory) - R frequencies 5658, 5695, 5732, 5769, 5806, 5843, 5880, and 5917 MHz
vtxTable Power Levels: 4
vtxTable Power Values: 0, 1, 2, 3
vtxTable Power Labels: 25mW, 200mW, 600mW, 1W; Save

vtxtable bands = 5; 
vtxtable channels = 8;
vtxtable band {
  1: BOSCAM_A, A FACTORY, {5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725};
  2: BOSCAM_B, B FACTORY, {5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866};
  3: BOSCAM_E, E FACTORY, {5705, 5685, 5665, 0, 5885, 5905, 0, 0};
  4: FATSHARK, F FACTORY, {5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880};
  5: RACEBAND, R FACTORY, {5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917};
};

vtxtable powerlevels = 3;
vtxtable powervalues = {0, 1, 2};
vtxtable powerlabels = {25, 100, 200};
save

vtxTable bands: 5
vtxTable channels: 8
vtxTable band 1: BOSCAM_A A CUSTOM, 5865-5725 MHz
vtxTable band 2: BOSCAM_B B CUSTOM, 5733-5866 MHz
vtxTable band 3: BOSCAM_E E CUSTOM, 5705-5945 MHz
vtxTable band 4: FATSHARK F CUSTOM, 5740-5880 MHz
vtxTable band 5: RACEBAND R CUSTOM, 5658-5917 MHz
vtxTable power levels: 4
vtxTable power values: 25, 100, 200, 400
vtxTable power labels: 25, 100, 200, 400

vtx_table_bands = [
    {"band": "BOSCAM_A", "factory": True, "frequencies": [5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725]},
    {"band": "BOSCAM_B", "factory": True, "frequencies": [5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866]},
    {"band": "BOSCAM_E", "factory": True, "frequencies": [5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945]},
    {"band": "FATSHARK", "factory": True, "frequencies": [5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880]},
    {"band": "RACEBAND", "factory": True, "frequencies": [5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917]}
]

vtx_table_power_levels = ["Low", "Medium", "High", "Max"]
vtx_table_power_values = [25, 50, 100, 200]

vtx_table:
    bands: 5
    channels: 8
    band_1:
        BOSCAM_A A_FACTORY
        values: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
    band_2:
        BOSCAM_B B_FACTORY
        values: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
    band_3:
        BOSCAM_E E_FACTORY
        values: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
    band_4:
        FATSHARK F_FACTORY
        values: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
    band_5:
        RACEBAND R_FACTORY
        values: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
    power_levels: 4
    power_values: 0, 1, 2, 3
    power_labels: 25, 200, 600, 800

vtxtable bands 6
vtxtable channels 8
VXT Table Band 1: BOSCAMA - Custom Frequency Range

| Value | MHz |
| --- | --- |
| 58.65 | |
| 58.45 | |
| 58.25 | |
| 58.05 | |
| 57.85 | |
| 57.65 | |
| 57.45 | |
| 57.25 |
VtxTable Band 2: BOSCAM_B - Custom Frequency Range (B): 5.733 GHz, 5.752 GHz, 5.771 GHz, 5.790 GHz, 5.809 GHz, 5.828 GHz, 5.847 GHz, 5.866 GHz
I cannot revise this text as it appears to be a table of some sort.
VtXTable Band 4: FATSHARK F - Custom Settings for Eytex
VTT Table Band 5: RACEBAND_R - Custom Settings for VTx Transmitter

RANGE SETTINGS
Customized range settings for optimal performance:

* Channel 1: 5658 MHz
* Channel 2: 5695 MHz
* Channel 3: 5732 MHz
* Channel 4: 5769 MHz
* Channel 5: 5806 MHz
* Channel 6: 5843 MHz
* Channel 7: 5880 MHz
* Channel 8: 5917 MHz
What are the VTX Table Band 6 Low-Race Levels for a CUSTOM car with speeds ranging from 5362 to 5621?
vtxtable powerlevels 4
Power values: 25, 200, 500, and 1000.
vTable Power Labels: 25 kW, 200 Ah, 500 Wh, Max.

save

vtxtable bands 5
vtxtable channels 8
VTx Table Band 1: BOSCAM_A - Custom Frequency Settings
--------------------------------------------------------

| Frequency (MHz) | Start | End |
| --- | --- | --- |
| 5865 | 5845 | 5825 |
| 5805 | 5785 | 5765 |
| 5745 | 5725 | |

(Note: I reformatted the text to make it more readable and added a header with brief description)
What is the purpose of this table? To determine frequency bands, perhaps? If so, here's a revised format:

VtxTable Band 2: BOSCAM_B Custom Frequencies

• 5733 MHz
• 5752 MHz
• 5771 MHz
• 5790 MHz
• 5809 MHz
• 5828 MHz
• 5847 MHz
• 5866 MHz
VTT Table Band 3: BOSCAM E Custom Settings -

* E (Channel): 5705, 5685, 5665, 5645
* Uplink Frequency Range: 5885-5945
VTT Table Band 4: FATSHARK F Custom - Specifications for Performance and Reliability
What is the table for?
vtxtable powerlevels 5
Power Table Values: 25, 100, 200, 400, 600
What are the optimal power labels for a vtxtable?

save

vtxtable bands 6
vtxtable channels 8
VXT Table Band 1: BOSCAM_A - Factory Settings
---------------------------------------------

| Frequency | Power |
|-----------|-------|
| 5865 MHz | 100% |
| 5845 MHz | 100% |
| 5825 MHz | 100% |
| 5805 MHz | 100% |
| 5785 MHz | 100% |
| 5765 MHz | 100% |
| 5745 MHz | 100% |
| 5725 MHz | 100% |

Note: The percentages represent the factory setting power levels for each frequency.
VXT Table Band 2: BOSCAM_B, B Factory Settings -

• 5733
• 5752
• 5771
• 5790
• 5809
• 5828
• 5847
• 5866
VTX Table Band 3: BOSCAM-E Factory Settings 5705-5945.
VTTABLE Band 4: FATSHARK F-Factory Specification -

• Range: 5740 to 5880 MHz (10 bands, 20 MHz each)
• Channel bandwidth: Up to 20 MHz
• Modulation schemes: QPSK, 16QAM, 64QAM, 256QAM
What is the significance of this table or data?
VXT Table Band 6: Low-Race L Factor (Units)

| Speed | L Factor |
| --- | --- |
| 53.33 | 53.73 |
| 54.13 | 54.53 |
| 55.03 | 55.53 |
| 56.03 | 56.53 |
| 57.03 | 57.53 |
| 58.03 | 58.53 |
| 59.03 | 59.53 |

(Units)
vtxtable powerlevels 5
VtxTable PowerValues: 1, 2, 14, 20, 26.
What are the performance characteristics of a VTXTABLE POWERLABELS system?
save

vtxtable bands 6
vtxtable channels 8
VXT Table: Band 1 - BOSCAM_A
A Custom Configuration: 0/0/0/0/0/0/0/0
VXTABLE Band 2: BOSCAM_B (Custom), 0/0/0/0/0/0/0/0.
What is the purpose of this table? VTXTable Band 3 Boscam E (E) Custom (0)?
The VTx table data for Band 4 from Fatshark F: CUSTOM.
Table: VTX Table Band 5 RACEBAND R CUSTOM
Data:
5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917
VTTable Band 6 (IMD6): Customised Settings for Enhanced Performance.
vtxtable powerlevels 3
vtxtable powervalues 14 23 0
vtxtable powerlabels 25 200 0
save

vtxtable bands 6
vtxtable channels 8
VtxTable (Band 1): BOSCAM_A - Customised Data Set: All Values Set to 0.
What is the status of this table band? VTXTABLE Band 2 - BOSCAM_B, a custom setup with all parameters set to zero.
What is the current status of BOSCAM_E? Is it set to CUSTOM? If so, what specific parameters are being utilized?
What is the purpose of this table? Is it a data log or a configuration file? The absence of descriptive headings and formatting makes it difficult to decipher. Can we reorganize the columns to provide clarity on what each column represents? Perhaps adding labels for "Timestamp", "Value", and "Unit" would be beneficial.
What is the raceband frequency for VTX Table Band 5?
VTTABLE BAND 6: IMD6-I. CUSTOMER 0-0-0-0-0-0-0-0.
vtxtable powerlevels 5
Power values: 14, 23, 27, 30, and 0?
vTable PowerLabels: Maximum Values (25, 200, 500)
save

vtxtable bands 6
vtxtable channels 8
VTX Table Band 1: BOSCAM_A - Custom Settings (0/0/0/0/0/0)
VTTABLE Band: 2 (BOSCAM_B) - Custom Configuration: 0/0/0/0/0/0/0/0.
Cannot improve further.
I cannot improve this text as it appears to be a technical or coding snippet and does not contain a coherent message.
The VTX Table Band 5 RACEBAND R: Custom Settings for Optimal Performance?
VtxTable Band 6 (IMD6): Custom Parameters Set to Default Values (0/0/0/0/0/0).
vtxtable powerlevels 3
vtxtable powervalues 14 23 0
vtxtable powerlabels 25 200 0
save

vtxtable bands=5
vtxtable channels=8
vtxtable band 1 BOSCAM_A A FACTORY 586.5,584.5,582.5,580.5,578.5,576.5,574.5,572.5
vtxtable band 2 BOSCAM_B B FACTORY 573.3,575.2,577.1,579.0,580.9,582.8,584.7,586.6
vtxtable band 3 BOSCAM_E E FACTORY 570.5,568.5,566.5,0,588.5,590.5,592.5,0
vtxtable band 4 FATSHARK F FACTORY 574.0,576.0,578.0,580.0,582.0,584.0,586.0,588.0
vtxtable band 5 RACEBAND R FACTORY 565.8,569.5,573.2,576.9,580.6,584.3,588.0,591.7
vtxtable powerlevels=4
vtxtable powervalues=0,1,2,3
vtxtable powerlabels=25,200,500,800
save

# vtxtable
vtxtable bands 5
vtxtable channels 8
Table 1: VTX Band 1 Specifications for BOSCAM_A

| Frequency (MHz) | Lower Limit (MHz) | Upper Limit (MHz)
| --- | --- | ---
| A | 5845 | 5865
| B | 5825 | 5845
| C | 5805 | 5825
| D | 5785 | 5805
| E | 5765 | 5785
| F | 5745 | 5765
| G | 5725 | 5745
What are the VTX table settings for Band 2 of BOSCAM_B? The answer is: B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866.
What is the purpose of this data? Can a more meaningful description be added to clarify its significance?
VTT Table Band 4: FATSHARK F - Custom Frequencies
---------------------------------------------------
Frequency Range: 5.74 GHz to 5.84 GHz
• 5740 MHz
• 5760 MHz
• 5780 MHz
• 5800 MHz
• 5820 MHz
• 5840 MHz
• 5860 MHz
• 5880 MHz
VTTABLE Band 5: Raceband R, Custom Frequencies -

• 5658 MHz
• 5695 MHz
• 5732 MHz
• 5769 MHz
• 5806 MHz
• 5843 MHz
• 5880 MHz
• 5917 MHz
vtxtable powerlevels 4
Table of Power Values:

| Value | Voltage (V) |
| --- | --- |
| 25 | 4.00 |
| 400 | 8.00 |
| 800 | 16.00 |
| 1600 | 32.00 |
VTT Table Power Labels: 25, 400, 800, 1K6
save

vtx_table_bands = [
    {"band": "BOSCAM_A", "factory": True, "channels": [5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725]},
    {"band": "BOSCAM_B", "factory": True, "channels": [5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866]},
    {"band": "BOSCAM_E", "factory": True, "channels": [5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945]},
    {"band": "FATSHARK", "factory": True, "channels": [5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880]},
    {"band": "RACEBAND", "factory": True, "channels": [5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917]}
]

vtx_table_power_levels = {
    "labels": ["25", "200", "600", "1W"],
    "values": [0, 1, 2, 3]
}

save

vtx_table:
bands 5
channels 8
band 1: BOSCAM_A A FACTORY 5840, 5820, 5800, 5780, 5760, 5740, 5720, 5700
band 2: BOSCAM_B B FACTORY 5905, 5885, 5865, 5845, 5825, 5805, 5785, 5765
band 3: BOSCAM_E E FACTORY 5950, 5930, 5910, 0, 6050, 6100, 6150, 0
band 4: FATSHARK F FACTORY 5920, 5940, 5960, 5980, 6000, 6020, 6040, 6060
band 5: RACEBAND R FACTORY 5977, 5933, 5909, 5885, 5861, 5847, 5833, 5820
power_levels: 4
power_values: 14, 23, 27, 29
power_labels: 25, 200, 500, 800
save

vtx_table_bands = {
    'band_1': {'factory': 'BOSCAM_A', 'values': [5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725]},
    'band_2': {'factory': 'BOSCAM_B', 'values': [5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866]},
    'band_3': {'factory': 'BOSCAM_E', 'values': [5705, 5685, 5665, 0, 5885, 5905, 5925, 0]},
    'band_4': {'factory': 'FATSHARK', 'values': [5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880]},
    'band_5': {'factory': 'RACEBAND', 'values': [5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917]}

vtx_table_power_levels = {
    'level': ['14', '23', '27', '29'],
    'value': [25, 200, 500, 800]
}

vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY (5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725)
vtxtable band 2 BOSCAM_B B FACTORY (5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866)
vtxtable band 3 BOSCAM_E E FACTORY (5705, 5685, 5665, 5885, 5905, 5925)
vtxtable band 4 FATSHARK F FACTORY (5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880)
vtxtable band 5 RACEBAND R FACTORY (5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917)
vtxtable powerlevels 4
vtxtable powervalues (14, 17, 23, 27)
vtxtable powerlabels (25, 50, 200, 500)
save

vtxtable bands=5, channels=8
vtxtable band 1 BOSCAM_A A FACTORY (5865-5725MHz)
    5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY (5733-5866MHz)
    5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY (5705-5925MHz)
    5705 5685 5665 5885 5905 5925
vtxtable band 4 FATSHARK F FACTORY (5740-5880MHz)
    5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY (5658-5917MHz)
    5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels=4
vtxtable powervalues: 14, 23, 27, 29
vtxtable powerlabels: 25, 200, 500, 800
save

vtxTable bands 5
vtxTable channels 8
vtxTable band 1 BOSCAM_A A Factory 586.5 MHz, 584.5 MHz, 582.5 MHz, 580.5 MHz, 578.5 MHz, 576.5 MHz, 574.5 MHz, 572.5 MHz
vtxTable band 2 BOSCAM_B B Factory 5733.5 MHz, 5752.5 MHz, 5771.5 MHz, 5790.5 MHz, 5809.5 MHz, 5828.5 MHz, 5847.5 MHz, 5866.5 MHz
vtxTable band 3 BOSCAM_E E Factory 570.5 MHz, 568.5 MHz, 566.5 MHz, 0 MHz, 588.5 MHz, 590.5 MHz, 592.5 MHz, 0 MHz
vtxTable band 4 FATSHARK F Factory 5740 MHz, 5760 MHz, 5780 MHz, 5800 MHz, 5820 MHz, 5840 MHz, 5860 MHz, 5880 MHz
vtxTable band 5 RACEBAND R Factory 5658 MHz, 5695 MHz, 5732 MHz, 5769 MHz, 5806 MHz, 5843 MHz, 5880 MHz, 5917 MHz
vtxTable powerLevels 3
vtxTable powerValues 14 dBm, 20 dBm, 23 dBm
vtxTable powerLabels Low Power (25 dBm), Medium Power (100 dBm), High Power (200 dBm)
save

vtxtable bands 5
vtxtable channels 8
VTX Table Band 1: BOSC AM A Factory Specifications
---------------------------------------------------

| Frequency | MHz |
|-----------|-----|
| 5,865 | |
| 5,845 | |
| 5,825 | |
| 5,805 | |
| 5,785 | |
| 5,765 | |
| 5,745 | |
| 5,725 | |

Note: The data appears to be frequency specifications for a VTX (Very High Frequency) table.
What is the VTX table for Band 2 BOSCAM_B, a factory setting with specific frequency values?
VtxTable: Band 3 BOSCAM_E - Factory Default Settings (5705, 5685, 5665); Unused Channels: 0; Max Frequency: 5885 MHz; Min Frequency: 5905 MHz; Channel Spacing: 0 kHz.
VTTABLE Band 4: FATSHARK Factory Settings (5740-5880 MHz)
What is the purpose of this table?
vtxtable powerlevels 4
Power Values: 14, 26, 29, and 30?
PowerLabels? VTxTable? 25 400 800 1W?
save

vtxtable bands 5
vtxtable channels 8
VTT Table Band 1: BOSCAM_A Factory Settings
------------------------------------------------
Frequency (MHz): 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
VTTABLE Band 2: BOSCAM-B, a factory setting for frequency hopping. The specific values are: 5733, 5752, 5771, 5790, 5809, 5828, 5847, and 5866.
VXT Table Band 3: BOSCAM_E E-Factory Settings
---------------------------------------------

| Frequency | Power Level |
|-----------|-------------|
| 5705 | 5685 |
| 5665 | 0 |
| 5885 | 5905 |
| 5925 | 0 |

Note: The "E" in BOSCAM_E likely refers to the band's designation as an "Experimental" or "Extended" frequency range.
What's the VTX table band for FATSHARK F-FACTORY? Here are the specs: Band 4, frequency range 5740 - 5940 MHz.
Vibration Table Band 5: Raceband R Factory Data - Not Provided
vtxtable powerlevels 4
Power Values: 14-20, 23, 25
Vtx Table Power Labels: 0-25, 26-100, and 101+ (MAX)
save

vtxtable bands 6
vtxtable channels 8
Vtx Table: Band 1 BOSCAM_A
Custom Frequency Range: 5845-5765 MHz
Incremental Steps: 10 kHz
5850, 5840, 5830, 5820, 5810, 5800, 5790, 5780
What is the purpose of this table?
What is the purpose of this table? It appears to be a frequency band allocation for a specific system, possibly related to wireless communication.

SKIP
VTT Table Band 4: FATSHARK Frequency Custom Ranges - 5.74 GHz, 5.76 GHz, 5.78 GHz, 5.8 GHz, 5.82 GHz, 5.84 GHz, 5.86 GHz, and 5.88 GHz
Table of VTX Table Band 5 RACEBAND R: Custom Settings for 5658-5941
Here is the text rewritten in a different style:

Custom Band 6 Low-Race Transmission VTX Table:

• 5362 - 5399
• 5436 - 5473
• 5510 - 5547
• 5584 - 5621
vtxtable powerlevels 4
VTTABLE power values: 25, 100, 200, and 500.
VTT table power labels: 25, 200, 800 maximum?

vtx_table_bands = {
    "5": {"channels": 8, 
          "band_1": {"factory": "BOSCAM_A", "values": [5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725]},
          "band_2": {"factory": "BOSCAM_B", "values": [5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866]},
          "band_3": {"factory": "BOSCAM_E", "values": [5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945]},
          "band_4": {"factory": "FATSHARK", "values": [5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880]},
          "band_5": {"factory": "RACEBAND", "values": [5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917]}
    },
    "power_levels": 4,
    "power_values": [14, 26, 29, 32],
    "power_labels": ["25", "400", "800", "1W6"],
    "save": True

vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
vtxtable band 2 BOSCAM_B B FACTORY: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
vtxtable band 3 BOSCAM_E E FACTORY: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
vtxtable band 4 FATSHARK F FACTORY: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
vtxtable band 5 RACEBAND R FACTORY: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
vtxtable powerlevels 4
vtxtable powervalues 0, 1, 2, 3
vtxtable powerlabels 25, 200, 500, 800
save

vtxtable bands 5
vtxtable channels 8
BOSCAM_A Factory Band 1: VTX Table - Frequencies
------------------------------------------------
5865 MHz | 5845 MHz | 5825 MHz | 5805 MHz | 5785 MHz | 5765 MHz | 5745 MHz | 5725 MHz
voltage Table Band 2: BOSCAM B - Factory Default Settings, comprising values 5733 to 5866.
BVT Table Band 3: BOSCAM-E Frequency Allocation E-Frequency Factory Settings

• 5705 - 5685 MHz: (reserved)
• 5665 - 5645 MHz: (reserved)
• 5885 - 5905 MHz: E-Frequency
• 5925 - 5945 MHz: E-Frequency
VtX Table Band 4: FATSHARK Factory Settings (4,560-5,880 MHz)

This table provides a comprehensive overview of the factory settings for VtX table band 4 from FATSHARK, covering frequencies ranging from 4.56 GHz to 5.88 GHz in increments of 20 MHz.
What is the purpose of this table? Is it a dataset for a specific project? The text does not provide sufficient context to make any improvements. Therefore, I return: SKIP
vtxtable powerlevels 4
Table of Power Values:

| Power Value |
-----------------|
| 14 |
| 20 |
| 27 |
| 36 |
VTT (Vertical Takeoff and Landing) table for power labels with four values:
save

Can’t discover your VTX? On the GitHub webpage, numerous VTX configurations exist, presented in JSON file format. To access these settings, navigate to the “Video Transmitter” tab, where you can download and load the necessary files.

To ensure optimal configuration of your VTX desk in Betaflight, empowering seamless VTX management and elevating your FPV flying skills with enhanced performance.

Edit Historical past

• Nov 2019 – Tutorial created
• February 2022: Updated for Betaflight 4.3 compatibility.
• Updated for Betaflight 4.5 as of July 2024.